Concrete Batching Plant
Mobile Concrete Batching Plant
Concrete Truck Mixer
Concrete Pump
Wheel Loaders
Block Making Machine
Asphalt Mixing Plant
Haomei News

Wheel loader's young adults

Aug 08, 2016

This is the wheel loader machine play the largest role in the stage, although the part has been out of the run-in period, lubricate tie are in place, but not reckless increased workloads, actually more considerations on the Internet already has a maintenance schedule, here is for everyone once again broadcasting the timetable.

Wheel loader's young adults

Every day

1, check for oil, water, gas leaks and overheating the parts;

2, check the engine oil, coolant and hydraulic fluid level;

3, check the tire pressure and damage;

4, check the gauges and lights;

5, the articulated pot butter.

Every 50 hours

1, check the fastening shaft bolt;

2, check the gearbox oil level;

3, check and adjust hand brake and foot brake, brake accumulator oil capacity;

4, check the throttle control, variable speed control system.

Every 100 hours

1, replace the gearbox oil (replaced every 600 hours), clean the oil sump strainer;

2, replace the engine oil (every 600 hours);

3, check the battery fluid level, battery lugs apply petroleum jelly;

4, check the rims and the brake disc bolts, axle bolt;

5, check the fastening bolt.

Every 200 hours

1, check the oil level of front and rear axles;

2, cleaning the air filter (if necessary, replace the filter);

3, cleaning oil, diesel oil, gearbox oil filter;

4, measuring tire pressure for 0.27~0.31Mpa;

5, check whether the working mechanism, the frame weld cracking;

6, check the alternator, fan belt tight.

Every 600 hours

1, replace the front and rear axle gear oil (replaced every 600 hours);

2, cleaning of fuel tank oil filter;

3, remove the water tank and radiator surface pollutants;

4, replace the engine oil and replace engine oil, diesel engine oil filter;

5, replace the gearbox oil and oil filters;

6, check the valve clearance.

Every 1200 hours

1, change the oil and clean or replace the oil filter, cleaned fuel tank;

2, check the operation of the engine;

3, check the hydraulic system;

4, check the steering system performance;

5, check the brake system, the replacement of brake fluid.

2,400 per hour

1, according to the engine manual for engine maintenance;

2, to the collapse of the gearbox, torque converter inspection;

3, check before and after the collapse of the bridge;

4, check every part of the machine welds.

website: www.haomeibatchplant.com to see more information about different parts of wheel loader, and if you have more question about it, feel free to contact us, we will reply you as soon as possible.

Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :

Pre:上一篇:Wheel loader prior checking and maintenance

Next:下一篇:Extend the service life of wheel loader